ePMP 2000 5GHz Smart Beam Forming Antenna

The ePMP 2000 is the next generation Access Point that brings Interference Tolerance to a whole new level with Cambium's unique Hypure Technology which combines Intelligent Filtering and Smart Beamforming. The ePMP 2000 Access Point System consists of a high performance, GPS Synchronized Access Point Radio with Intelligent Filtering, a new compact high performance Access Point Antenna and the optional Smart Beamforming Antenna.

The Intelligent Filtering of the Access Point works for both receive and transmit. It protects any channel from noise from off-channel interferers with a filter that dynamically moves around the channel. On transmit side, it protects the RF environment by reducing off-channel transmission noise.

Key Features
• Reduce Impacts of Uplink Interference: Beamforming agorithms maximize the Received Signal Strength Indication (RSSI) and Error Vector Magnitude (EVM) of the radio uplink
• Maintain low latency and high throughput in high interference environments: By mitigating the effects of uplink interference, packet retransmissions are kept to a minimum which allows for high throughputs and avoids the extra latency of retransmissions
• Improvement in both Uplink and Downlink Throughputs: An increase in throughput and reduction in retransmissions on the uplink can also increase downlink throughputs for TCP traffic which relies on efficient transmission of acknowledgements for optimal performance

Product Specifications
• Frequency Range: 5150 - 5970 MHz (exact frequencies as allowed by local regulations)
• Connectors to Access Point: 2 x 50 ogm, RP (Reverse Polarity) SMA, DC Couples (powering antenna)
• Mounting Hardware: Included for mounting to ePMP 5 GHz Sector Antenna (C050900D021A); Included for mounting to mast diameters 2" to 4" (5 cm to 10 cm)
• Physical Dimensions: 13.1" (L) x 8.4" (W) x 1.5" (H) (33.3 cm x 21.3 cm x 4.6 cm) Without Mounting Brackets
• Weight: 3.2 lbs. (1.5 kg) Without Mounting Brackets
• Environmental: IP65
• Radome Material: UV Protected ABS
• Operating Temp: -40°C to 60°C (-40°F to 140°F)
• Power Consumption: 2.5 W

Product Includes
• (1) Beam Forming Antenna
• (1) Fixed Clamp
• (2) M8 Nuts
• (12) M6x12 Screws
• (2) Antenna Connectors
• (1) Rear Mast Clamp
• (2) M8x160 Bolts
• (1) Environmental Cover
• (1) Front Mast Clamp
• (1) Angular Clamp
• (2) RP-SMA Cable

DataSheet