Categories


G6 Entry | UVC-G6-Entry

An intelligent door entry system with native UniFi Protect and UniFi Access integration, including enhanced two-way audio.
Manufacturer: Ubiquiti
Call for pricing

Dimensions
176 x 45 x 29.6 mm(6.9 x 1.8 x 1.2")
Integrated Camera
?
IR Night Vision
5 m (16 ft)
Resolution
Main camera: 5MPPackage camera: 8MP
UniFi Application Suite
ProtectAccess
Face Recognition
?
NFC Card & Keyfob Access
?
Apple/Google Wallet
?
Mobile Unlock
?
Face Unlock
?
Two-Way Intercom & Doorbell Access
?
Weatherproofing
IP55
Smart Detections (People, Vehicles, Animals)
?
Tamper Resistance
IK07
Audio
Two-way audio
UL 294 Level
Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
NDAA Compliant
?
Weight
275 g (9.7 oz)
Enclosure Material
Aluminum
Mount Material
Wall mount: Stainless steelGangbox mount plate: SGCC steelGangbox mount cover: PolycarbonateWedge mount: Aluminum
Mounting
Wall mount, Gangbox mount plate, 20° wedge mount (Included)Junction box (Optional)
Indoor and Outdoor Use
Yes
Networking Interface
GbE RJ45 port
Connectivity
BLE 4.1NFC
Power Method
PoE+UL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption
16W
Supported Voltage Range
42—57V DC
Video
Image Settings
Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR
Max. Frame Rate
Main camera: 30 FPSPackage camera: 3 FPS
Resolution
Main camera: 5MP, 1920 x 2560 (3:4)Package camera: 8MP 3264 x 2448 (4:3)
Optics
Resolution
Main camera: 5MP CMOSPackage camera: 8MP CMOS
Field of View
Main camera: H: 100°, V: 135°, D: 180°Package camera: H: 66°, V: 51.7°, D: 78°
Sensor
Main camera: 5MP CMOSPackage camera: 8MP CMOS
Lens
Fixed focal length
Night Mode
Built-in IR LED illumination and IR cut filter
LEDs
R/G/B/W Learn More
Button
(1) Ring button(1) Factory reset(1) Tamper switch
Processor
Quad-core Arm® Cortex®-A53 based chip
PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UVC-G6-Entry, V01
Ambient Operating Temperature
-30 to 50° C (-22 to 122° F)
Ambient Operating Humidity
5 to 90% noncondensing